Lenovo 20Y5002WIX User Manual page 96

5. Remove the screw that secures the M.2 solid-state drive and remove the M.2 solid-state drive out of the
slot.
6. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then carefully insert the
new M.2 solid-state drive into the slot at an angle of about 20 degrees. Pivot the M.2 solid-state drive
downward and install the screw.
Note: If there is a film in the M.2 solid-state drive slot, remove the film before you install the new M.2
solid-state drive.
7. Reinstall the bottom cover.
8. Turn the computer over. Connect the ac power adapter and all cables to the computer.
92
P1/X1 Extreme User Guide