Lenovo 20Y5002WIX User Manual page 94

Attention: Do not touch the contact edge of the memory module. Otherwise the memory module might get
damaged.
To replace a memory module:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 88.
2. Ensure that the computer is turned off and disconnected from ac power and all cables.
3. Close the computer display and turn the computer over.
4. Remove the bottom cover. See "Replacing the bottom cover" on page 88.
5. A Mylar film might cover the memory module. To access the memory module, flip open the film first
Then, open the latches on both sides of the memory slot at the same time
module 3 .
6. Flip open the film first
20 degrees 2 and pivot the memory module downward until it snaps into place
memory module is firmly installed in the memory slot and cannot be moved easily.
90
P1/X1 Extreme User Guide
1 . Then, insert the new memory module into the memory slot at an angle of about
2 and remove the memory
3 . Ensure that the
1 .