Grill Pan And Handle - Creda E010E Installation And User Instructions Manual

Grill Pan and Handle

The grill pan handle is detachable from the pan, to facilitate cleaning and storage.
The grill pan handle can be fixed as follows:
(a)
Step 1
Step 1 Remove the screw and washers from the grill pan bracket (a).
Step 2 Tilt the handle over the recess (b).
Step 3 Slide it towards the centre of the pan (c).
Step 4 Locate the handle over the bracket (d).
For a fixed handle, replace the screw and washers and ensure they are fully
tightened up. If a detachable handle is required, do not replace the screw and
washers.
Note: If a fixed handle is required, the grill pan is unable to be kept in the main oven with
the door closed.
Grill Pan Food Grid and Anti-Splash Tray
GRILL PAN
Note: To stop fat splashing onto the grill mesh, it is important to use the anti-splash tray as
shown in the grilling chart. Always clean the grill pan, anti-splash tray and food grid after
each use.
16
(b)
Step 2
ANTI-SPLASH
TRAY
(c)
Step 3
GRILL PAN
(d)
Step 4
FOOD GRID