Grill Pan And Handle - Creda D130E Installation And User Instructions Manual

Grill Pan and Handle

The grill pan handle is detachable from the pan, to facilitate cleaning and storage.
The grill pan handle can be fixed as follows:
(a)
Step 1
Step 1 Remove screw & washers from the grill pan bracket (a).
Step 2 Tilt the handle over the recess (b).
Step 3 Slide it towards the centre of the pan (c).
Step 4 Locate the handle over the bracket (d).
For a fixed handle, replace screw & washers and ensure they are fully
tightened up. If a detachable handle is required, do not replace screw &
washers.
Note: If a fixed handle is required, the grill pan is unable to be kept in the main oven with
the door closed but may be stored in the top oven with the door closed.
GRILL PAN AND FOOD GRID
SHELF POSITIONING FOR GRILLING
SHELF POSITIONS 1 OR 2
TO BE USED FOR FOODS
REQUIRING BROWNING.
NOTE: Preheat the grill at setting 6 on the grill control for approximately 5 minutes.
The grill pan must be placed on the correct shelf and positioned centrally
under the grill element.
Leave the control at 6 for toast, and for fast cooking of foods.
For thicker foods requiring longer cooking, turn the switch to a lower setting
after the initial sealing on both sides at 6. The thicker the food, the lower the
control should be set.
DO NOT line the grill pan with aluminium foil, as this increases the amount
of fat spitting which can cause a fire.
After use always return the grill control to the OFF (0) position.
(b)
Step 2
GRILL PAN
ENSURE SHELVES ARE FITTED CORRECT WAY UP.
3
2
1
DO NOT PLACE FOOD/UTENSILS DIRECTLY ON THE FLOOR
(c)
Step 3
FOOD GRID
3
2
1
(d)
Step 4
SHELF POSITIONS 2 OR 3
TO BE USED FOR
GRILLING.
11