Advertisement
SOLDRON 740 3-IN-1 HOT AIR AND SOLDERING STATION
SOLDRON 740 3-IN-1 HOT AIR AND SOLDERING STATION
SOLDRON 740 3-IN-1 HOT AIR AND SOLDERING STATION
Thank you for choosing Soldron ® as your preferred soldering brand. This product will give you the
perfect soldering experience with longevity, efficiency and reliability.
We also offer after sales service and assistance in order to help you maintain your product in perfect
working condition
Package Contents:
1 X Soldering Station
1 X Soldering Iron
1 X Blower
1 X Cradle
1 X Iron Stand
3 X Nozzle
1 X Patchcord
1 X Power Code
Warning and Coution are defined as follows:
WARNING!:
Misuse may potentially cause death of, or serious injury to, the user. The manufacturer will not
be held liable for any loss life or property.
CAUTION!:
Misuse may potentially cause death or serious injury to the user. Proper dilligence has to be
used by the user in order to avoid injury or physical damage to objects and or fire hazard.
NOTE: Please use proper safety gear such as goggles and breathing mask in a safe work
environment, prior to operation of this product.
When the power is on, tip temperature is between 200°C/392°F and 480°C/896°F and 480°C/896°F
These temperatures are potentially high enough to cause the following
•
Serious burn injuries by touching the metallic parts/hot air to oneself or others.
•
Can cause fires if product comes into contact with inflammable abjects.
•
People in the vicinity of the product should be warned about it's potential dangers.
•
Power should be off when not being used and when unattended.
•
Before replacing parts on the respective unit, be sure to switch off the unit and allow
ample time for cooling to ambient
740
740
740
STATION
STATION
STATION
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Soldron 740
Summary of Contents for Soldron 740
- Page 1 SOLDRON 740 3-IN-1 HOT AIR AND SOLDERING STATION SOLDRON 740 3-IN-1 HOT AIR AND SOLDERING STATION Thank you for choosing Soldron ® as your preferred soldering brand. This product will give you the perfect soldering experience with longevity, efficiency and reliability.
- Page 2 The following conditions must be strictly adhered to while using this product. • Use for soldering applications only • Banging the soldering iron against hard surfaces to remove extra solder may damage the product beyond warranty, and cause short circuit or shock hazard. •...
- Page 3 When the tip develops a hold due to wear of protective iron coating, it’s time to purchase and replace the bit with an original Soldron bit. Long time idling at higher temperatures may cause de-tinning whitch can be identified by the solder not adhering to the tip.
- Page 4 DETAILS:- 1) Power supply DC Amp Readout (MAX- 2 Amps). 2) a) RF indicator for disturbance in power supply (indicates only on TEST mode) b) DC Voltmeter for Output and TEST voltage REA DOUT 3) Toggle switch for Voltage Test or Output. 4) USB 5volts DC out 5) Power Supply DC out (15Volts/1Amp MAX) 6) DC volts ln put for TEST (25Volts MAX)
Need help?
Do you have a question about the 740 and is the answer not in the manual?
Questions and answers