Soldron 938 Quick Start Manual

Temperature controlled digital soldering station with sleep mode

Advertisement

Manufactured in india By
Vimla Engineering
A2/157,Shah & Nahar lndustrial Estate, S. J. Marg,
Lower PareI ( W), Mumbai - 400 013.
Tel No. : 022-48973337
www.soldron.com
938
TEMPERATURE CONTROLLED DIGITAL
SOLDERING STATION WITH SLEEP MODE
Thank you customer for choosing Soldron ® as your preferred
brand. As this will give you perfect soldering with long life and
reliability. We also offer you service and assistance in order to
help you maintain your product in perfect working condition.

Set up and operation:

1) Put the iron in the provided stand.
2) Connect the iron plug in the iron socket provided on station.
3) Connect the power cord into the mains.
4) Turn on the power switch located on the left side of the station.
5) Set the temperature using knob as per requirement.
6) Once the iron reach to the preset temperature the display will
show a blinking dot(.) after3 digit.
7) The iron is now ready for use.
8) Station enters into sleep mode after 15 mints of inactive.
938
STATION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 938 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Soldron 938

  • Page 1 TEMPERATURE CONTROLLED DIGITAL SOLDERING STATION WITH SLEEP MODE Thank you customer for choosing Soldron ® as your preferred brand. As this will give you perfect soldering with long life and reliability. We also offer you service and assistance in order to help you maintain your product in perfect working condition.
  • Page 2 5) When the tip develops a hole due to wear of protective iron coating, warranty and cause short it's time to purchase and replace the bit with an original Soldron® bit. • circuit or shock hazard. • Do not attempt to modify the unit as warranty will be void.

Table of Contents