Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for USX-MOUNT WML018-01
Summary of Contents for USX-MOUNT WML018-01
- Page 1 42-100" Full Motion TV Wall Mount Model: WML018-01 PRODUCT GUIDE...
- Page 2 DIMENSIONS: TV INTERFACE: SIDE VIEW-RETRACTED: 672.6mm 662mm 72.5mm MAX:600mm MIN:200mm +5° MAX: 400mm -15° 430mm 299.3mm MIN: 100mm 360mm ≈260mm TOP VIEW: SIDE VIEW-EXTENED: +45°/-45° 472mm Congratulations on your latest purchase.Follow these simple instructions and you'll have your TV mounted in no time. Supports most 42 in - 100 in (106.68 cm - 254.00 cm) TVs Maximum Weight Capacity: 150 lbs(68 kg) Supports VESA Sizes up to 600mmx400mm...
- Page 3 SAFETY WARNING: 1.Never let children climb on product or play with product. 2.Do not sit or stand on product. 3.Do not fasten a TV that is heavier than the recommended load rating to the mount. 4.Using suitable concrete wall or wood stud wall. 5.Improper installation may cause property damage and/or personal injury, so the installation must be done by two qualified contractors.
- Page 4 Wall mounting and TV bracket assembly hardware: C--Lag bolt D-- Anchor F--Bubble Level E--Allen key 4pcs 4pcs TV mounting hardware: a--M4x12 screw b--M6x12 screw c--M8x25 screw d--M4x30 screw e--M6x35 screw f--M8X45 screw 4 pcs 4 pcs 4 pcs 4 pcs 4 pcs 4pcs g--M8 spacer...
- Page 5 For wood studs: If you mount TV mount into wood studs, hold mounting template at desired position of wood stud, pre-drill the mark 4 holes using drill bit to a depth of 2.5", fix wall plate unit (A) to the wall with 7/32"...
- Page 6 Step 3: Hang the pre-assembled TV unit onto the horizontal bars of the wall plate unit. Pull down straps to lock the brackets in the bar (Figure 4). CAUTION: This step must require 2 or more people to finish. Pull down Figure 4 Step 4:...
- Page 7 Step 5 Make sure the TV unit is horizontal, you can adjust the TV plate a little bit /-3 degrees) to level the TV, then fasten TV plate by bolts with Allen key (E). (Figure 6) Bolts ±3° Figure 6 Step 6 You may need loosen the handle to tilt TV to your desired angle, please remember to fasten the handle tightly after adjustment.
- Page 8 Step 7 Manage TV cables orderly and guide them through the velcros. (Figure 8) Figure 8 PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TWO TV BRACKETS TO THE BACK PANEL OF TV IN STEP 2 . MAKE SURE THE APPROPRIATE MOUNT HARDWARE IS BEING USED PROPERLY .
Need help?
Do you have a question about the WML018-01 and is the answer not in the manual?
Questions and answers