Page 1
WMM008-01 INSTRUCTION MANUAL For 23-55" TV If you have any questions along the way, just give us a call 1-800-460-0956 or mail to customerservice@x-mount.com. We’re ready to help!
Page 2
CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS Before getting started, let’s check below lists to make sure it is just right for you! MAX:400mm/15.75" (MIN:75mm/2.95") Check your TV VESA is within No? This mount is NOT compatible. MAX:400mm/15.75"...
Page 3
Dimensions TV INTERFACE MAX:400mm[15.75in] MIN:75mm[2.95in] MAX:400mm [15.75in] MIN: 75mm [2.95in] WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - EXTENDED Ø9mm[Ø0.35in] +5° 116mm [4.55in] 231mm 524mm [20.64in] [9.10in] -15° FULLY ASSEMBLED MOUNT SIDE VIEW - RETRACTED TOP VIEW - EXTENDED 224mm [8.82in] 437mm...
Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Page 5
Parts and Hardware for STEP 2 Wall plate Lag Bolt Concrete wall anchor (NOT INCLUDED) Contact us at telephone 1-800-460-0956 (USA) or mail to customerservice@x-mount.com. to have these additional pieces shipped directly to you. Concrete Wall Anchor 3pcs Velcro M6x8mm Bolt Allen Key Level x1...
STEP 1 Attach Brackets to TV 1-1 Disassemble Wall Plate into Two Pieces ① Wall plate TV plate 1-2 Choose Correct Configuration Per VESA Size on the Back of Your TV. If your TV VESA size is bigger than 200x200, you must use allen key and bolts to attach 4pcs of extenders...
Page 9
1-5 Attach the TV Plate 1-4 Need Spacer? No, choose suitable screws and washers. a b c VESA ≤ 200mm x 200mm Yes, choose suitable screws, washers and spacers. d e f g h i Tips: If you need to combine M6/M8(c/e/f) screws with 2.5mm spacers( i ), you have to remove the inner circle.
Page 10
STEP 2A Attach Wall Plate to Wall Wood Stud Option CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall, must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) ●...
Page 11
3. Drill pilot holes using a 5/32 in. (4.0 mm) diameter drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 2.36 in. (60 mm). Be sure to drill into the center of the studs. 4. Install wall plate using lag bolts .
Page 12
STEP 2B Attach Wall Plate to Solid Concrete Wall CAUTION: Avoid potential personal injury or property damage! ● Mount the wall plate assembly directly onto the concrete surface ● Minimum solid concrete thickness: 8 in. (203 mm) 1. Position the wall plate on the wall at your desired height.
Page 13
3. Insert anchors. CAUTION: Be sure the anchors are seated flush with the concrete surface. 4. Insert wall plate using lag bolts .Tighten the lag bolts only until they are pulled firmly against the wall plate. CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
Page 14
STEP 3 Wall Plate Installation Integrity Test Before hanging TV, please try to pull the mount to make sure that it has been assembled on the wall tightly. 77 LBS(35 kg)
Page 15
STEP 4 Hang and Secure TV to Wall Plate Hang pre-assembled TV unit on the wall plate and fix them using screws ①, Clip inserts into wall plate. ①...
Page 16
STEP 5 Adjustments 5-1 TV leveling adjustment (±4°): Loosen 2 leveling bolts on the rear of TV plate by maximum 2 turns, adjust to level and retighten to secure. ±4° Loosen Tighten...
Page 17
5-2 Tilting angle adjustment (+5°/-15°) : Loosen handle and tilting bolt, adjust TV to your desired position, +5° Tilting bolts then tighten handle and tilting bolt. -15° Tilting bolts +5° -15°...
Page 18
5-3 Cables manage: Manage TV cables orderly and guide them through the velcros. Velcro...
Need help?
Do you have a question about the WMM008-01 and is the answer not in the manual?
Questions and answers