Degreasing the brew unit
Touch the sensor.
Select
Degrease the brew unit
touch OK.
The maintenance programme will then
start.
Follow the instructions in the display.
Remove the water container and the brew
unit. Clean the interior of the machine. Rinse
the brew unit by hand and refit it with a
cleaning tablet in it.
display.
Cleaning the brew unit and interior
The moving parts of the brew unit
are lubricated. Cleaning agents will
damage the brew unit.
Only ever clean the brew unit by
hand with warm water. Do not use
any cleaning agents.
To ensure good tasting coffee and to
prevent the formation of microbes in
the appliance, remove and clean the
brew unit under running water once a
week.
Open the appliance door.
and
will appear in the
Cleaning and care
Remove the water container.
Press the button under the handle of
the brew unit and, whilst doing so,
turn the handle forwards .
First, pull the brew unit sideways
and then slide it out forwards .
While doing this, tilt the brew unit
forwards .
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (see
"Problem solving guide").
67