Polygroup PoolBot User Manual page 9

2. Purge out the air
Hold the PoolBot with two hands and submerge it into the pool. Rotate the PoolBot until no air
bubble is coming out.
3. Turn on the power
While keeping the entire PoolBot underwater, switch on the product by pressing the power button
located at the bottom. Water will begin to flow out from the nozzle.
4. Deploy the PoolBot
Orient the PoolBot in its upright position and slowly release the product. The product shall slowly
sink to the pool floor. In case the PoolBot is flipped upside down, use the floating handle to correct
its orientation.
9