Summary of Contents for Polygroup PoolBot
- Page 1 PoolBot User Guide Simple steps to setting up and enjoying your pool pump Sign up for future 09C3A4USAA16 offers and discounts. Scan the QR Code. ©2022...
-
Page 2: Table Of Contents
Setting Up the PoolBot ...................... -
Page 3: Welcome
Welcome! Congratulations on your new Funsicle PoolBot – cordless robotic pool cleaner. This guide will walk you through everything from setting up to maintaining and enjoying your Poolbot. As always, we’re here to help. For any issues, questions, or extra support, visit funsicle.com/support, or contact Customer Service at 888-670-4FUN (888-670-4386) or HelloFun@Funsicle.com. -
Page 4: Safety Guidelines
), otherwise the cleaning effect will be affected. • When the PoolBot is stored for a long period of time, it should be charged every three months time to maintain battery life between 40%-60%. Please use the original and authorized power adapter only. -
Page 5: Warnings
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Charger Model: XSG1261000US POLYGROUP SERVICES N.A. INC. 303 SW 16th Street, Suite 5, Bentonville, AR, 72712, USA SAVE THESE INSTRUCTIONS... -
Page 6: Before Your Begin
Before You Begin The environmentally-friendly PoolBot is a new type of rechargeable automatic cleaner that filters the pool water and gets rid of suspended particles without replacing the pool water. Before assembling your PoolBot, check the contents and become familiar with all the parts. -
Page 7: Specifications
(330 mm L x 330 mm W x 230 mm H) Power Button • Weight: 7.3 lb (3.3 kg) Charging • Storage condition: Socket 41°F - 95°F (5°C - 35°C), RH <75% Setting Up the PoolBot Before first use Attach the flipper and fix it with the screws provided. -
Page 8: Using The Poolbot
Fully charge the PoolBot before each use. Attach the charging connector to the charging socket at the bottom of the PoolBot. Place the PoolBot in its upright position and then, plug in the charger. The indicator lamp on the charger shall turn red when charging. It should turn green once fully charged. - Page 9 4. Deploy the PoolBot Orient the PoolBot in its upright position and slowly release the product. The product shall slowly sink to the pool floor. In case the PoolBot is flipped upside down, use the floating handle to correct its orientation.
-
Page 10: Adjusting The Maneuvering Pattern
Adjusting the Maneuvering Pattern 1. This PoolBot comes with 4 wheels: 2 wheels are fixed and 2 wheels are adjustable. By modifying the combination of these 2 adjustable wheels, it will change the maneuvering pattern of the PoolBot. -
Page 11: Maintaining The Poolbot
1. Open all lock latches, detach the top cover and remove the filter screen. 2. Rinse off all the dirt and debris with running water. Use mild dish detergent if necessary. 3. Wipe the PoolBot with a clean cloth and let it air dry. -
Page 12: Troubleshooting Guide
Improper maneuvering Try different maneuvering pattern setting patterns. Refer to the The PoolBot keeps bouncing at “Adjusting the Maneuvering the same direction, some Pattern" section in the areas are always missed. Irregular pool shape user guide. - Page 13 [This page is intentionally left blank.]...
- Page 14 [This page is intentionally left blank.]...
- Page 15 [This page is intentionally left blank.]...
- Page 16 WARRANTY For warranty information, visit funsicle.com/warranty. NEED PARTS? To order parts and accessories, visit funsicle.com. REGISTER YOUR PRODUCT Scan the QR code Distributed by: Polygroup Pacific Limited Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong.