Table of Contents
Advertisement
Safety Guidelines
IMPORTANT SAFETY INSTRUCTIONS
When installing and using this product, basic safety precautions should always be followed, including
the following:
READ AND FOLLOW ALL INSTRUCTIONS
Keep this User Guide for future reference. Failure to follow these warnings and
instructions can result in serious injury or death to users, especially children.
•
Read the user guide carefully, and use the PoolBot according to the instructions. We are not liable
for any losses or injuries caused by improper use.
•
Only use the accessories recommended or sold by the manufacturer.
•
This model only applies to swimming pools with a flat floor.
•
Do not allow children to ride on the PoolBot or play with it as a toy.
•
Use the original and authorized power adapter only.
•
The adapter cord should only be repaired/replaced by a qualified electrician.
•
Do not turn on the PoolBot when the pool has no water.
•
The charging adapter must be connected to a leakage protected and earthed socket when
charging.
•
Do not operate the PoolBot when there are people in the pool.
•
Always clean and wash the filter screen after use.
•
Turn off the PoolBot when maintaining, cleaning or when it is not in use.
•
The PoolBot should be stored in a cool and ventilated place, away from direct sunshine.
•
While charging, the PoolBot should be kept in a cool place, and not be covered with anything to
prevent the damage of internal electrical components caused by overheating.
•
Only certified professionals can disassemble the sealed driving kit of the PoolBot.
•
Do not operate the PoolBot while pool filter is running.
•
Oil seals for motor contain grease, which may cause water pollution if grease leaks occur.
•
Due to the limitation of battery capacity, the PoolBot is only suitable for swimming pools with size
up to 500 ft
(46.4 m
2
•
When the PoolBot is stored for a long period of time, it should be charged every three months time
to maintain battery life between 40%-60%. Please use the original and authorized power adapter
only. If the PoolBot is not charged for a long time, the battery voltage will be lower than the
over-discharge protection voltage due to the self-discharge of the battery, which may cause fatal
damage.
•
Do not use or store the PoolBot near any heat source.
•
Do not pierce the exterior of the PoolBot with nails or other sharp objects. Do not hammer, impact
or throw the PoolBot.
•
Do not bury the cord. Locate the cord to minimize abuse from lawn mowers, hedge trimmers, and
other equipment.
•
Ensure that children do not attempt to access the PoolBot while it is operating.
•
Only use the charger provided.
), otherwise the cleaning effect will be affected.
2
4
Advertisement
Table of Contents
