4. Adjust view angle.
2.3 Install Rear Camera
Position the rear camera at upper central of rear windshield. Use cable
1.
to connect rear camera with front camera to check the preview image
is in right position (not upside down) before installation. If the preview
image is upside down, please rotate the camera 180 degree to make it
correct.
Check and confirm the field of rear view. Then clean the surface of the
2.
windshield with alcohol to ensure that the adhesion surface is clean.
Remove the film on the mount of rear camera, and then hard press
3.
rear camera to ensure firmly stuck.
12