Battery warning The battery for this car camcorder is sealed internally. DO NOT attempt to disassemble the camcorder and remove the battery. Always charge using the provided system. Improper charging of the battery may result in explosion. The battery is designed for this camcorder and is not customer replaceable.
1 Introduction 1.1 Package Contents The package contains the following items. If there are any missing or damaged items, contact your dealer immediately. Camcorder Bracket CD-ROM Quick start guide Car adapter...
1.2 Product Overview Front View TOP and Bottom Side (Left and Right) Views Rear View Item Item Bracket Socket LCD Panel Microphone Up Button ( Power Button Down Button ( Memory Card Slot Enter Button ( USB Connector Wide Angle Lens HD(Mini HDMI) Connector Speaker Back Button (...
2 Getting Started 2.1 Inserting the Memory Card Insert the memory card with the gold contacts facing the back of the camcorder. Push the memory card until it clicks into place. (Use class 6 or above the micro SD cards for this camcorder; It is recommended to format the micro SD cards before the initial use.) To remove the memory card Push the edge of the memory card inward until you hear/feel it click,...
2.2 Installing in Vehicles 2.2.1 Mount to Windshield Attach the bracket to the camcorder. Slide it into the bracket holder until you hear a click. With the suction-cup laying flat, position the suction-cup on the windshield. Hold the base firmly on the windshield and press down the clamp to mount the car holder to the windshield.
2.2.2 Adjust the camcorder position Loosen the knob to swivel the camcorder vertically. Knob Loosen the knob to swivel the camcorder horizontally up to 360°. Knob 3. Then tighten the knob to make sure the camcorder is securely locked in place.
2.3 Connecting to Power Use only the supplied car adapter to power up the camcorder and charge the built-in battery. Connect one end of the car adapter to the USB connector of the camcorder. Plug the other end of the car charger to the cigarette lighter socket of your vehicle.
3 Using the Camcorder 3.1 Recording Videos 3.1.1 Record videos while driving When the vehicle engine starts up and the Automatic Record function is enabled, the camcorder automatically turns on and starts recording. Recording will automatically stop when the engine is switched off. Or, press the button to stop recording manually.
3.2 Playback Videos and Photos If recording is in progress, press the button to stop recording. The standby screen is displayed. Press the button to enter the OSD menu. Press the button to select the file category that you want to browse and press the button.
3.2.1 Deleting Files To delete file(s), do the following: If recording is in progress, press the button to stop recording. Press the button to enter the OSD menu. Press the button to select File Deletion and press the button. Press the button to select the file category and press the button.