Yaesu FT-736R Technical Supplement page 178

FT-736R
(1)
(4)
Remove ail connections from the
rear panel, and then remove the two
rrying handle and screws in the ca
eight
screws
affixing
the covers.
f handle and covers, and
Remove
place t h
the workbench.
msceiver left side up on
Remove the six screws affixing the RX
IF Unit at the left side of the chassis,
and carefully fold the board away to
allow access to the solder side.
ed below
Move the jumper plug
| cw
SSB Filter
Jumper Plug
SSB Filter
the RX IF Unit and its six
(using care not to pinch any
installing other options,
to the next paragraph.
Move
handle, and their screws.
?
Solder
Jumper Plug