Table of Contents
Advertisement
Set the display language
Turkish, Spanish, Portuguese, Greek or Dutch.
To reset the language, see the following steps.
> [HS SETTINGS] >
1.
Select
[LANGUAGE], press
selection.
2.
Select a language, then press
The language setting is saved.
Check for dial tone
Press
. If you can hear a dial tone, the
installation is successful. Your phone is now
ready to use.
•
Make sure the installation procedures
described above are properly done.
•
It may be a wiring problem. If you have
changed your telephone service to digital
service from a cable company or a VoIP
service provider, the telephone line may
need to be rewired to allow all existing
telephone jacks to work. Contact your
cable or VoIP service provider for more
information.
Operating range
When the handset is out of range, the
handset displays
If there is a call while the handset is out of
range, it may not ring, or if it does ring, the call
may not connect well when you press
closer to the telephone base, and then press
to answer the call.
to
If the handset moves out of range during
a telephone conversation, there may be
interference. To improve reception, move closer
to the telephone base.
What is standby mode?
Your phone is in standby mode when it is
idle. The date and time and missed calls are
displayed on the standby screen.
Display icons
In standby mode, the icons shown on the
main screen tell you what features are
available on your handset.
.
. Move
EN
11
Advertisement
Table of Contents
