Homewhiz Setup - Beko B3WT5941WS User Manual

In order to use the HomeWhiz func-
tion, the application must be in-
stalled on your smart appliance, and
your washing machine must be
paired with your smart appliance via
Bluetooth. If your washing machine
is not paired to your smart device it
works as an appliance which does
not have a HomeWhiz feature.
Your product will operate as paired
to your smart device via bluetooth.
The controls made by means of the
application will be enabled through
this pairing. Therefore the bluetooth
signal strength between the appli-
ance and the smart device must be
adequate.
Please visit
the Android and iOS versions sup-
ported by the HomeWhiz applica-
tion.
All the safety measures described in
"GENERAL SAFETY INSTRUC-
TIONS" section of your user manual
apply to the remote operation
through HomeWhiz function as well

6.15.1 HomeWhiz Setup

In order run the application, a connection
must be established between your appliance
and HomeWhiz application. In order to es-
tablish this connection, you must follow the
steps given below for the setup process on
both your appliance and the HomeWhiz Ap-
plication.
a. If you are adding a device for the first
time, touch "Appliances" tab on the
HomeWhiz Application. Select "ADD AP-
PLIANCE" (touch here for setting up a
new appliance) button in the upper right
corner. Perform the setup by following
both the steps below and the steps in the
HomeWhiz Application.
b. To start the setup, make sure that your
machine is turned off. Press and hold the
Temperature button and the Remote
to see
www.homewhiz.com
Control Function button simultaneously
for 3 seconds to switch your machine to
HomeWhiz setup mode.
c. When the appliance is in HomeWhiz
setup mode, you will see an animation on
the display and the bluetooth icon will
flash until your machine gets paired with
smart device. Only programme knob will
be active in this mode. Other buttons will
be inactive.
d. Follow the instructions in display of
HomeWhiz application.
e. Wait until the installation is complete.
Once the setup is completed, give your
washing machine a name. Now, you can
tap and see the product you have added
in the HomeWhiz Aplication.
EN / 34