Table of Contents
Advertisement
• The recommended settings are preset at our manufacturing facility.
• ONLY change the settings if there is too much or too little mist.
• Start with adjusting the off time first and then the on time.
ON TIME
(Amount of time fog is being produced)
OFF TIME
(Amount of time between fogging)
• The recommended cycle times are preset at our manufacturing facility
• If repairs or changes have been made to the control box, pressure tank, or water feeds, we
recommend that you flush the lines to ensure that no particles, liquid Teflon, Teflon tape, pipe dope,
or any other foreign matter is present in the system.
• The "on time" is set by rotating the black knob
marked ON TIME.
• The "off time" is set by rotating the black knob
marked OFF TIME.
Timer Adjustment
Recommended Timer Settings
Settings
Steps to Set the Timer
Instructions
Page 13
Time
1.5 minutes
8 minutes
Images
Advertisement
Table of Contents
