Part Functions - Roland MT-32 Owner's Manual

PART FUNCTIONS
@ TIMBRE SETUP
The MT-32 comes with an internal 128-timbre data library that lets
you select sounds for any of the non-rhythm parts.
+> Refer to the separate volume "Sound List" for a full descrip-
tion of the timbres.
The 128 timbres are classified into separate sound groups, each
containing from four to eleven timbres.
PROCEDURE
{1) Press the PART button that corresponds to the part for which
you wish to select the timbre. (You can select parts 6, 7, 8, by
pressing part switches 1, 2, 3 while pressing MASTER
VOLUME switch.)
{2) Press the SOUND GROUP button, then select the sound group
you desire with the SELECT/VOLUME control.
FLASHING
(3) Press the SOUND button,ithen select the sound you desire
with the SELECT/VOLUME control.
LiFiarec 3AcouPisrod
FLASHING
Hoa = (3
aoe Sé
LIP iar
NAME OF TIMBRE
18