Roland MT-32 Owner's Manual page 36

Model MT — 32
1.TRANSMITTED DATA
mBypassed message
In Overflow Assign mode, retransmits the following MID] IN messages {rom MID] OUT.
+ All channel voice messages except Nole On.
» Note on message (s) to which MT ~ 32 cannot assign voice (s) because the number
of received Note on messages exceeds MT - 32's simuitaneusly assignable voices.
+ System Exclusive message whose manufacturer ID* is 41H.
wExclusive
Status
FOH : System exclusive
F7H: EOX (End Of Exclusive)
For details, see Sections 4 and 5, and Roland Exclusive Messages.
2RECOGNIZED RECEIVE DATA (Parts 1 - 8)
wNote event
@Note off
Status Second Third
an kkH vH
an KKH 00H
kk = note number OOH ~ 7FH ( 0 - 127)
vw = velocity ignored
nA = MIDI Channel OH - FH (1- 16)
A tone whose envelope mode is "NO SUS" ignores Note off message.
@Note on
Stetue Second Third
nH kKkH wh
kk = note number OOH - 7FH ( 0 - 127)
w = velocity OIH - 7FH ( J ~ 127)
n= MIDI Channel OH - FH (1-~ 16)
Note numbers outside of the range 12-108 are transposed to the nearest octave inside
the range,
mControl change
@ Modulation Depth
Status Second Third
BnH O1H WH
vv = Modulation depth OOH - 7FH ( 0 ~ 127 )
n = MIDE Channel OH - FH ( 1- 16)
@Data Entry
Status Second Third
BnH 06H wH
w = Value of a parameter specified by RPC. (See description in RPC MSB.)
n = MIDI Channel OH- FH (1- 16)
@ Main Volume
Statue Second Third
Bn O7H wi
w = Volume Value OOH - 7FH ( @ - 127 )
5h = MID! Channel OH - FH (1 - 16)
Controls the volume of a Part accessible through the received MIDI channel. The
maximum yoiume is determined by Master volume and Expression message.
MIDI implementation Version : 2.00
@ Panpot
'Status Second Third
nH OAH wH
vv = Panpot Value
OOH ~ 7FR ( 0 - 127 )
n = MIDi Channel OH - FH (1
~ 1%)
Orientation of sound is as follows.
127 = LEFT, 63 = CENTER, 0 = RIGHT
@ Expression
Status Second Thi
Bn OBH + WH
vy = Expression OOH - 7FH ( 0 ~ 127 )
nm = MIDI Channei OH- FH (1- 16)
Contrals the volume of a Part accessible through the received MIDI channel. The
maximum volume is determined by Master volume and Main Volume message.
@Hold~1
Status Second Third
BoH 40H wH
vv = OOH - SFH : off
vw = 40H - 7FH : on
n = MID! Channel OH- FH (1- 16)
@RPC LSB
Stews Second Third
BnH 64H wH
vy = The lower byte of a parameter number controlled by RPC. (Refer to RPC MSB,)
n = MIDI Channel ON} - FH (1 - 16)
@RPC MSB
Status Second Third
Bn 65H wH
vv = The upper byte of a parameter number controlied by RPC.
n = MIDI Channel OH- FH (1- 16)
Using MIDI RPC, MT - 32 parameters can be controlled by Control change message.
RPC MSB and LSB specify the parameter to be controlled while Data entry sets the
parameter value.
Effective RPC to MT - 32 is Bender range.
RPC Data Entry Description
MSBo LSB
OOH 6O0H | (WH Bender Range
we=t- 26
Unit in semitone, 2 octaves maxinum
@ Resets All Controllers
Stotus Second Third
Bak 79H 00H
n = MIDI Channel oH- FH C1- 16)
Sets eatch of the following controls as follows.
Controiler setting
Modulation Depth OFF ( 6)
Expression WAX { 127)
Hoid i OFF C80).
Pitch Bender Change CENTER