Table of Contents
Advertisement
The MT-32 incorporates a 128-timbre sound library that lets you
select sounds for any of the non-rhythm parts.
The sound source block allows you to play up to thirty-two notes
for the eight parts simultaneously, each of which may consist of
any number of notes within the upper limit. (The exact voicing
capacity allowed, however, varies with the timbres you select. See
page 22 for details.)
The MT-32 works in conjunction with a MID! keyboard, sequencer
{a device
that stores
musical
data for playback at the desired
timing), and other instruments that generate MIDI data.
The MT-32 applications are roughly broken down into the follow-
ing two categories. See the corresponding section for a full ex-
planation,
,
(1) Using the MT-32 with the Roland Piano, the Roland PR-100
Digital Sequencer, and Roland PR-100 Pre-Recorded Software
+ See Section
[2] "USING
THE MT-32 WITH
ROLAND
PR-100 PRE-RECORDED SOFTWARE" (page 8).
(2) Using the MT-32 with a sequencer loaded with your own data
+ See Section [3] "USING
THE MT-32 WITH
ORIGINAL
DATA" (page 10).
Advertisement
Table of Contents
