Service, Repair And Maintenance; Maintenance; Waste Electrical And Electronic Equipment (Weee) - VETEC WT1-B User Instructions

4. Service, repairs and maintenance
To prevent damage to the Tensiometer, make sure that repairs and recalibrations are carried
out by qualifi ed personnel.
It is recommended that recalibration and repairs are done at Vetec's service department
located in Denmark or by authorized partners. Contact Vetec's service department for further
information.

5. Maintenance

The Tensiometer requires no maintenance except regular cleaning.
� Wipe off moisture or dust using a slightly damp, clean cloth.
• Cover the exterior with a thin layer of oil, e.g. WD 40. This will prevent corrosion.
• Keep the Tensiometer in a dry, clean place.
• Never use cleaning solutions or high-pressure water.

6. Waste electrical and electronic equipment (WEEE)

A Static Line Tensiometer must not be thrown away with general
rubbish. Any disposal of the device must be carried out in accor-
dance with the regulations in force in the country of use. Contact
your local government's recycling or solid waste department for
more information regarding the proper disposal of electronics in
your region.
- 7 -