Installation And Usage; Installation - VETEC WT1-B User Instructions

3. Installation and usage

Product adjustment must only be performed by a qualifi ed technician. The
user shall ensure that the operator has taken note of this instruction, usage
and maintenance manual before using the Static Line Tensiometer.
"DANGER"

3.1. Installation

The tensiometer is fi tted with cable gland downwards, as illustrated in fi g. 1+2.
Make sure that the electrical cable is not damaged during the wire installation.
Fig. 3
Cell cables installed
Red - EXC +
Green - SIGNAL +
Yellow - SIGNAL -
Blue - EXC-
1. Connect suitable milivoltmeter between green and yellow cable.
Fig. 5
- 5 -
Tensioner shaft
Resistanceplate
Fig. 4