Thank You For Purchasing Vetec's Static Line Tensiometer; Important Information; Youtube Video Tutorials - VETEC WT1-B User Instructions

1. Thank you for purchasing Vetec's Static Line Tensiometer

The Static Line Tensiometer from Vetec A/S is constructed to operate in harsh and humid environ-
ments.
The development focused on optimizing features that make it easy for the operator to handle the
tensiometer and still achieve stable and accurate measurements.
Achieving an IP67 class has been especially important to accommodate customers working in wet
and humid environments.
© Vetec A/S
Teknikvej 69
DK-5260 Odense S
Tlf.: +45 65919802
post@vetec.dk
www.vetec.dk

1.1 Important information

READ ALL INSTRUCTIONS AND WARNINGS CAREFULLY BEFORE INSTALLATION AND USE.
These instructions have been published by Vetec A/S and are not subject to any guarantee.
The instructions may be withdrawn or revised by Vetec A/S at any time and without further
notice. Corrections and additions will be added to the latest version of the instructions.
Carefully read through the safety instructions in this user manual and follow the installation
and operating procedures and requirements. Failure to follow these warnings could result in
serious injury and property damage.
Every use should be carried out according to current regulations in the country of use. Vetec
A/S is not responsible for local regulations not being followed.

1.2 YouTube video tutorials

Visit Vetec's YouTube channel to watch tutorials
demonstrating the installation, daily use and menu
setup.
- 3 -