Table of Contents
Advertisement
LUNA2000-200KTL-H0 Smart Power Control System
User Manual
● The cable outer diameter can be measured using the ruler sticker in the
● If a cable has a jacket, ensure that the jacket is in the maintenance
● Ensure that the AC power cables are connected securely. Otherwise, the Smart
● Do not pull the cables horizontally after they have been secured, as this may
Step 1 Prepare cables by referring to section
Step 2 Remove rubber rings according to the cable diameter range.
Step 3 Connect the AC power cables to the terminal block and ensure that the cables are
securely connected.
Figure 5-11 Single-core cable connections
Issue 05 (2022-06-30)
NO TICE
maintenance compartment.
compartment.
PCS may fail to operate, or become overheated during operation due to an
unreliable connection, which will damage the terminal block.
damage the wiring terminals.
NO TE
The cable colors in these figures are for reference only. Select appropriate cables according
to local standards.
Copyright © Huawei Technologies Co., Ltd.
B Crimping an OT or DT
5 Electrical Connections
Terminal.
38
Advertisement
Table of Contents
