Table of Contents
Advertisement
LUNA2000-200KTL-H0 Smart Power Control System
User Manual
Procedure
● The cable outer diameter can be measured using the ruler sticker in the
● Ensure that the cable jacket is in the maintenance compartment.
● Ensure that the DC power cables are connected securely. Otherwise, the Smart
Step 1 Prepare cables by referring to section
Step 2 Remove rubber rings according to the cable diameter range.
Step 3 Connect the DC power cables to the terminal block and ensure that the cables are
securely connected.
Do not pull the cables horizontally after they have been secured, as this may
damage the wiring terminals.
Figure 5-9 Single-core cable connections (recommended)
Issue 05 (2022-06-30)
NO TICE
maintenance compartment.
PCS may fail to operate, or become overheated during operation due to an
unreliable connection, which will damage the terminal block.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
B Crimping an OT or DT
5 Electrical Connections
Terminal.
36
Advertisement
Table of Contents
