LUNA2000-200KTL-H0 Smart Power Control System
User Manual
4.6 Wall-Mounted Installation
Prerequisites
●
●
Installation Procedure
Step 1 Install the mounting bracket.
Avoid drilling holes into the water pipes or power cables buried in the wall.
● To avoid inhaling dust and to prevent dust from falling into your eyes, ensure
● Wipe away any dust in or around the holes and measure the spacing. If the
● Level the top of the expansion sleeve with the concrete wall after removing the
Figure 4-13 Installing the mounting bracket
Issue 05 (2022-06-30)
You have prepared expansion bolts. M12x60 stainless steel expansion bolts are
recommended.
Purchase the mounting bracket separately from the Company.
WARNING
NO TICE
that safety goggles and a dust mask are worn when drilling holes.
holes are inaccurately positioned, drill the holes again.
bolt, spring washer, and flat washer. Otherwise, the mounting bracket will not
be securely installed on the concrete wall.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
26