Programmed Play - Sherwood CD-2030C Operating Instructions Manual

TRACK
al
Baa
Fag Ae al (2)
[a] (a)
v
2. Press the PLAY/PAUSE button.
eT RA
j tru! take
£3] fa] fis] >
@ SEARCHING A SPECIFIC PASSAGE IN PLAY MODE
® Release the button when the desired point has been reached.
e If the CD player reaches the end of the last track during forward search, the unit switches to the stop
mode.
¢ If the CD player reaches the beginning of the first track during backward search, play restarts at this
point.
4. REPEAT PLAY
@ REPEAT ALL TRACKS
e Press the REPEAT button before or during play.
¢ repeat[ALL] appears on the display and all tracks of the CD will be repeated.
¢ If the CD player reaches the end of the last track during forward search, the unit goes back to the begin-
ning of the first track and continues to search forward.
@ REPEAT ONE TRACK
e After selecting a desired track with the FORWARD or BACKWARD SKIP button, press the REPEAT but-
ton twice before or during play.
e repeast(i] appears on the display and the selected track will be repeated.
¢ If the REPEAT button is pressed once again in this mode, repeat play mode is canceled.
5. PROGRAMMED PLAY
You can program up to 20 tracks to play in any sequence you choose.
If you exceed 20 tracks, the "Full" sign appears to remind you that the memory is full and cannot accept any
more tracks.
BZ PROGRAMMING
Example: When you wish to program the tracks 4, 17 and 8, the programming procedure is as follows.
1. In the stop mode, press the PROGRAM/REVIEW button.