Do you have a question about the RP-7700H and is the answer not in the manual?
Questions and answers
Keven L McKitrick
April 10, 2025
How do you hook up the speakers
1 comments:
Mr. Anderson
April 10, 2025
To connect speakers to the Sharp RP-7700H:
1. Use speakers with an impedance of 8 ohms or more to avoid damaging the unit. 2. Connect the speaker system B (left and right) and/or speaker system A (left and right) terminals. 3. Connect the cable with a line to the positive (+) terminal and the cable without a line to the negative (−) terminal. 4. Ensure the right and left channels are not reversed when connecting.
Need help?
Do you have a question about the RP-7700H and is the answer not in the manual?
Questions and answers
How do you hook up the speakers
To connect speakers to the Sharp RP-7700H:
1. Use speakers with an impedance of 8 ohms or more to avoid damaging the unit.
2. Connect the speaker system B (left and right) and/or speaker system A (left and right) terminals.
3. Connect the cable with a line to the positive (+) terminal and the cable without a line to the negative (−) terminal.
4. Ensure the right and left channels are not reversed when connecting.
This answer is automatically generated