Sharp RP-7700H Operation Manual page 130

jpn : B APMS (Automatic Programmable Music
Selector)
1 Load a disc and close the CD compartment.
© @ 2 Press the UP button to select a desired track forward, and
M the DOWN button to select a desired track backward. Then
Gao ws o0D press the MEMORY button. The "M" and "P" indicators light
to show that programmed sequence is being entered into
® 4 @) memory. The SECOND indicator will show the selected
track number, and MINUTE indicator will show the playback
the 10 track number input buttons on the remote control.
@ For example, to choose selection 12
(1}Press the "1" button on the remote control.
{2)Press the "2" button on the remote control.
@ "12" appears on TRACK NO, indicator.
@ "Er" appears on TRACK NO, indicator if a selection number
exceeding total number of selections on disc is entered.
Enter another selection number.
3 Repeat step 2 for any other track. Up to 20 tracks can be
programmed.
4 Press the PLAY button to start playback of memorised pro-
gramme.
Notes:
@ During playback or pause, programming is not possible. -
@ Programmed tracks are displayed in sequence: P01 ,PO2, etc.
Call, Clear
1 Press the CALL button whilst the disc is stopped to review the
order of a programmed sequence before playback begins.
The playback sequence and track numbers will be displayed
for easy confirmation.
2 Press the CALL button during playback or pause to check the
number of the next track to be played.
cy
MDP ein riaM P
oa o4aga
Hi oF
3 In order to clear the entire programmed sequence, first press
the STOP/CLEAR button to stop the disc, and then press the
STOP/CLEAR button again the same number of times as the
T number of tracks which were programmed.
@ Each time the button is pressed, one track will be cleared,
s beginning with the jast track programmed.
STOPY_
[Lestorcuean | |e C3 @ Opening the CD compartment automatically cancels the
programmed sequence.