Quick Installation - AMC CT952GSM Use And Installation Manual

QUICK INSTALLATION

1. Disable the PIN block and any other possible service (call transferring, mobile box, etc.) of the
SIM card and insert it in the SIM CARD placement.
2. Supply power to the dialler and be sure that the CT952 has the same reference (or negative)
potential of the alarm panel. If the CT952 is supplied through the alarm panel (or other
system), the reference potential is automatically equal.
3. Attach a 2 Ah buffer battery to the " BATTERY " terminals
4. If it is the First installation make a complete RESET ( see the section TOTAL DIALLER
RESET )
5. Wait for the dialler working (Green LED blinking).
6. Programme the telephone dialler using one of these three ways
a. Locally with a touch telephone previously connected to the terminals " PHONE"
b. Remotely calling the telephone dialler. In this way the user is asked the technical code.
After entering the code and " # " the dialler is ready for programming as in the previous
mode
c. Programming the SIM card by means of a mobile telephone. Vocal messages have to
be stored using the microphone on board or by connecting locally or remotely with a
telephone (see a. and b.)
4