Table of Contents
Advertisement
2
CREDIT DUE DATE
When on this function can be employed in the event you have a rechargeable SIM card.
5 minutes after the last call made, the dialler calls the CUSTOMER SERVICE telephone number and
records through speech synthesis the first 30 seconds of the message. This message contains the
residual credit and the user will be able to listen to it again, at any time, by entering his own menu.
3
ANSWER DISABLED
When on the GSM module does NOT answer external calls. At the same time, the third open
collector output (OUT 3) is NO longer controllable in the remote control mode, but it is used to
simulate a telephone ring. Of course, if this function is enabled, a touch-tone telephone has to be
connected to the PHONE terminals.
CAUTION: when this function is enabled, it is possible to control the dialler outputs in the remote
control mode only after you have been called in connection with an event.
4
SYSTEM STATUS
This carries out an automatic check of the system status (RESET input) operated through the output
8 ON/OFF (remote control). You need to operate output 8 (impulse operation) to activate/deactivate
the system.
A 5 second pause is introduced.
Based on a RESET input measuring, the vocal directions report the current status
5
POWER SAVING MODE
When on this function switches the module off when the supply voltage drops below 11V. The
module will be immediately switched back on in the event of an alarm or when the supply voltage is
back to over 11V.
REMOTE OUTPUT CONTROL
The six outputs of the dialler can be controlled remotely after a connection between the dialler and
any remote telephone devices has been set.
The telephone connection can be generated by a call from the dialler or set by the user that calls the
dialler. In both cases it is possible to work on the dialler outputs after having composed the
authorized USER password.
Then :
1. Make a call to the dialler that answer after 1 ring.
2. When it is asked, compose the personal password ( default = 1 )
3. Confirm the password with # or wait few seconds.
4. Execute what requested by the Voice (see USER MENU).
USER MENU
1)
TO ACCESS THE SYSTEM PRESS 1
20
Advertisement
Table of Contents
