Table of Contents
Advertisement
ENTER OUTPUT NUMBER TO CHANGE IT
1)
TO CHANGE OUTPUT STATUS PRESS 1
Key in a number between
NOTE: impulsive outputs can only be activated. Stable outputs can be activated (when they are
disabled) or disabled (when they are enabled).
NOTE: OUTPUT 3 cannot be commanded when the function ANSWER DISABLE (dip-switch 3) is
enabled.
2)
FOR SYSTEM STATUS PRESS 2
With this request it will be heard (by vocal synthesis) the inputs and the outputs status.
It is not necessary to press any key. If You want abort this operation press # .
3)
TO CHANGE PERSONAL PASSWORD PRESS 3
ENTER NEW PASSWORD
Key in directly the new personal code composed (from 1 to 7 figures). If the code is composed by 6
figures or less wait few seconds or confirm it immediately with
CONFIRM NEW PASSWORD
Key in again the new code to confirm it.
4)
FOR SIM CARD VALIDITY NOTIFICATION PRESS 4
With this request it is heard the recorded message recorded during the call to the CUSTOMER
SERVICE preset number. If the message is not yet recorded or the function CREDIT DUE DATE is
not enabled (Dip-Switch 2 : OFF) the request is ignored.
During the message playing ( approximately 30 seconds) it is possible to press
1 and 8 to activate or deactivate the connected output.
#
.
21
# to stop.
Advertisement
Table of Contents
