Yamaha DEQ5E Operation Manual page 13

O a D
D ыс
TA Gk 1194 8A TOH AT С
R LIR L
° C2) CI
= BUD — SD = E E E e
AES/EBU ANALOG OUTPUT NALOG INPU ( )
@ BAUD RATE select switch
Set baud rate with this switch when communicating with DEQS or a personal computer through the RS-485
terminal.
WORD CLK input terminal
The word clock signal received from the master device is input to this terminal.
During digital audio signal input, inputting the word clock signal received from the master device to this terminal
enables more stable operation.
To receive the signal input to this terminal, use the "UTILITY" menu to make the appropriate settings.
When the signal is received properly, the sampling frequency of the received signal is displayed in @ Fs section.