Bissell REVOLUTION HYDROSTEAM 3672E Manual page 9

After-Cleaning Care (continued)
Cleaning the Machine
Nozzle may be HOT. Let machine cool before touching.
1. Place fingertips into grips
on both sides of nozzle. Press
release buttons with thumbs
and rotate nozzle to remove.
4. Check steam bar for clogs.
Wipe underside of steam bar
with a wet towel or manually
remove visible clogs if
necessary.
WARNING
steam-cleaning or when the nozzle is heated.
2. Open hose door. Rinse
nozzle with warm water.
Remove debris with clean
out tool. Note: Parts are not
dishwasher or automatic
washing machine safe.
5. Let nozzle dry before
reassembling. Reinstall nozzle
by first lining up tabs with
grooves of foot. Rotate nozzle
back into place until you feel
two clicks.
To reduce the risk of injury, do not touch the steam cleaning nozzle or adjacent surfaces when
3. If brush roll chamber is
dirty, clean with a cloth.
CONTINUED ON NEXT PAGE
global.BISSELL.com 9