Bissell REVOLUTION HYDROSTEAM 3672E Manual page 10

After-Cleaning Care (continued)
Using the Rinse and Storage Tray (varies by model)
A
B
1. There are 2 hooks on each
side of part A that hook under
part B. Press B down onto
A. The water cup (C) can be
stored on the side of the tray.
4. With hose tool door open,
recline machine and press
power button to turn ON.
Run for 6-8 seconds to rinse
brush rolls.
Storing Your Machine
Once your cleaning is complete, make sure both the dirty and clean water tanks are emptied, rinsed
out, and dried before the next use. Wrap cord around cord wrap for storage. Store machine in a
protected, dry area.
10 global.BISSELL.com
C
2. Place machine on tray. Fill
rinse cup with fresh tap water
to the fill line printed on cup.
Pour water into tray as shown.
5. Close hose tool door. Press
power button to turn ON and
run until all water is picked up.
Repeat steps 3-4 until foam is
completely rinsed. Press power
button to turn machine OFF.
3. Open hose door on foot.