Table of Contents
Advertisement
HOW TO EDIT SERIAL NUMBER
1) Enter Service menu first, and check the color of the text "SERIAL NUMBER EDIT".
If the text color is white, then you can press remote commander "Right " to start edit the serial number.
If the text color is orange, then you need to Reset the serial number before you can edit.
*The Reset progress: Enter "Self Diagnosis History" item and Press <6> and <0> to make "Serial Number Edit"
editable (limit is 5 times)
2) You can edit the serial number by using the arrow keys (Up, Down) to select the number you need, and
use (Left, Right) to shift to next digit.
SERIAL NUMBER EDIT
3) When finish, please press "Enter" to save (store) the result.
***A pop up dialogue will display for you to confirm the result before save, see below example:
Input Data Correct ?
YES
4) After edit, the color of serial number text will change to
SERIAL NUMBER EDIT
KDL-32W6100/KDL-43W6600/KDL-32W6103/KDL-43W6603 (IN5)
A
B 1 2 3 4 5
Cursor on text is orange, you can use Up and Down key to
select the number you want
This means YES (cursor on text is black)
NO
AB12345
orange
like below:
SERIAL NUMBER EDIT
8500001
82
SYS SET
Advertisement
Table of Contents
