Table of Contents
Advertisement
2021/07/17 22:37:53 (GMT+09:00)
SEC 2. ADJUSTMENT
HOW TO ENTER SERVICE MODE (2 ways)
TV Under Standby Mode
1) Turn on the main power switch to set TV in standby mode.
2) Press the buttons on the remote commander as below:
Info (DISPLAY) (Digit key) 5 Volume "+" Power On
3) TV will power on, and then Service menu will display.
TV Power On
1) Turn on the TV.
2) Press the buttons on the remote commander as below,
and enter service mode.
Left Right Mute Enter Mute Volume "+"
3) Service mode display.
Function
Service mode off
Adjustment Item up / down
Data Value up / down
KDL-32W6100/KDL-43W6600/KDL-32W6103/KDL-43W6603 (IN5)
The flow of control
<Return> / <Menu>
/
/
NOTICE:
1. Change of SERIAL NUMBER EDIT and
are only possible when the text is displayed in white.
Once you edit and confirm the result, the text color will turn
into orange.
2. When replace Main Board or panel, please confirm Serial
Number and
Model NAME EDIT
set type. If they are different, please adjust to the correct one.
3. Software upgrade guide, please refer to "APPENDIX-2".
Model NAME EDIT
are correct according to the full
65
SYS SET
Advertisement
Table of Contents
