Table of Contents
Advertisement
WEIDER HEALTH & FITNESS
pace 42
О
L]
STEP 11
PART NAME `
Cap the ends
of the Support
Tube
with 5/8"
ROUND PLASTIC COVER CAPS (32).
Place the CYLINDER MOUNTING BRACKET (59)
into one of the resistance setting holes and secure
with a 5/16" FLAT WASHER (21) and a TENSION
KNOB (60).
Attach RESISTANCE
CYLINDER
(58)
to the
CYLINDER
MOUNTING
BRACKET
(59) with a
5/16" X 1 1/2" HEX HEAD BOLT (30) and a 5/16"
NYLON LOCK NUT (22).
Remove
STEPPER
RESISTANCE
SCALE
DECALS (48) from backing and attach Decals to
the Pedals so they align with hole settings on the
Pedals.
Setting "1" should be to the front of the
Pedal. (SEE DETAIL B.)
Remove backing from adhestive strips on FOOT
PADS (61) and attach to the rear of the Pedals.
Secure each with a #8 SHEET
METAL SCREW
(62).
SETTING
RESISTANCE:
After
Pedals
are
attached
to
the
Resistance
Cylinders,
the
resistance
can
be changed by unscrewing
the
TENSION
KNOBS
(60) from
the Pedals
and
moving the RESISTANCE CYLINDER MOUNTING
21 5/16" FLAT WASHER
22 5/16" NYLON LOCK NUT
31 5/16" X 1" HEX HEAD BOLT
36 2 1/2" SQUARE PLASTIC INSERT CAP
63 1 1/4" ROUND PLASTIC INSERT CAP
L] Assemble the STEPPER HANDLE (15) to the
MAIN FRAME (1) by bolting through the brackets
of the
Stepper
Handle
and
then
through
the
mounting holes inside and nearest to the top of
the Main Frame Tube.
Assemble 5/16" FLAT
WASHERS
(21) onto the bolts and secure with
5/16" NYLON LOCK NUTS (22).
Cap the top of the MAIN FRAME (1) with a 2 1/2"
SQUARE PLASTIC INSERT CAP (36).
Cap the ends of the STEPPER HANDLE (15)
with 1 1/4" ROUND PLASTIC INSERT CAPS
(63).
Attach STATION 2 DECALS (49) to the MAIN
FRAME
(1) just above the Resistance Cylinder
Support Tube.
STEPPER
HANDLE ASSEMBLY
DETAIL
В
DETAIL
C
Advertisement
Table of Contents
