Sinoboom 0407SE Operation Manual
  1. Manuals
  2. Brands
  3. Sinoboom Manuals
  4. Lifting Systems
  5. 0407SE
  6. Operation manual

Sinoboom 0407SE Operation Manual

Hide thumbs Also See for 0407SE:
Table of Contents

Advertisement

Quick Links

Download this manual
Part No.501072100002
Rev: A
Jan 2022
Operation
Manual
产品说明书
PRODU
C T MAN U AL
0407SE/1530SE
0608E (2132E)
G T JZ
0808E (2732E)
G T JZ
0808E (2732E)
G T JZ
G T JZ
0808E (2732E)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 0407SE and is the answer not in the manual?

Questions and answers

Related Manuals for Sinoboom 0407SE

Summary of Contents for Sinoboom 0407SE

  • Page 1 Operation Part No.501072100002 Rev: A Manual Jan 2022 产品说明书 PRODU C T MAN U AL 0407SE/1530SE 0608E (2132E) G T JZ 0808E (2732E) G T JZ 0808E (2732E) G T JZ G T JZ 0808E (2732E)
  • Page 3 Operating, servicing and maintaining this vehicle or equipment can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or equipment in a well-ventilated area and wear gloves or wash your...
  • Page 4 : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China Zip Code : 410600 Copyright © Hunan Sinoboom Intelligent Equipment Co., Ltd. All Rights Reserved The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.

  • Page 5: Application

    Decals/Nameplate Inspection of the Operation Manual for details.) Trade identification MODELS SERIAL NO. Imperial Metric From 0107200100 to present 0407SE 0407SE 1530SE NOTE: • Product model is applied in product nameplate for distinction of products of different main parameters.
  • Page 6 This Page Intentionally Left Blank...
  • Page 7 This manual covers the basic parts information of one or more products. Therefore, please use this manual according to your needs. If you find problems in the manual or have suggestions for improve- ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as possible.
  • Page 8 This Page Intentionally Left Blank...

  • Page 9: Table Of Contents

    1 Performance Parameters ..1-1 Testing the Platform Controller (SINOBOOM) ......6-5 2 Machine Components ..2-1 Testing the Drive Speed.
  • Page 10 Decals/Nameplates(AS) ..10-23 Decals/Nameplates(CSA) ..10-26 Appendix 1: Symbols and Description....... A-1 Appendix 2: Prepare the Work Record Before Delivery ..A-5 Appendix 3: Repair & Inspection Report ......A-7 © Jan 2022 0407SE Operation Manual...

  • Page 11: Introduction

    The owner or administrator of the machine shall also provide the manufacturer’s maintenance information to the person responsible for maintaining the machine. If you have any questions, contact Hunan Sinoboom In- telligent Equipment Co., Ltd.. 0407SE Operation Manual © Jan 2022...
  • Page 12 This Page Intentionally Left Blank © Jan 2022 0407SE Operation Manual...

  • Page 13: Performance Parameters

    Drive speed (raised) 0～0.5mph 0～0.8km/h Uptime (in a no-load state) 20～23s Downtime (in a no-load state) 25～27s Gradeability 3°(Front to back)/1.5°(Left to right) Max. allowable inclination Turning radius (inside) 0.3m Turning radius (outside) 1.35m 4ft 5in 0407SE Operation Manual © Jan 2022...
  • Page 14 The ground bearing data is approximate values not considering different options and only used when it is safe enough. e) The loads of persons, accessories, tools and materials are factored into the rated platform capacity. © Jan 2022 0407SE Operation Manual...

  • Page 15: Machine Components

    MACHINE COMPONENTS Figure 2-1 0407SE Operation Manual © Jan 2022...
  • Page 16 20.Battery charger √ 21.Weldment, Left door √ 22.Ladder √ 23.Level Sensor √ 24.Chassis √ √ 25.Flash Light √ 26.Drive Reducer,DC √ 27.Steer Cylinder √ 28.Steer Wheel √ 29.Ground Controller √ 30.Weldment, Right door √ © Jan 2022 0407SE Operation Manual...
  • Page 17 Operating/raised position： The machine comes in operating/raised position when the platform is raised until the down limit switch disengages. Note：The platform height(from ground to platform floor) is 2.1±0.1m（6ft 10.7in±4in） when the down limit switch disengages. 0407SE Operation Manual © Jan 2022...
  • Page 18 MACHINE COMPONENTS This Page Intentionally Left Blank © Jan 2022 0407SE Operation Manual...

  • Page 19: Safety

    In case of any accident involving the machinery of so, people who have alcohol or drugs in their system, Hunan Sinoboom Intelligent Equipment Co., Ltd., notify or experience excessive fatigue or depression, are Hunan Sinoboom Intelligent Equipment Co., Ltd. Imme- prohibited from operating or using this machine.

  • Page 20: Electrocution Hazards

    Table 3-1 Minimum Safe Distance Voltage Minimum Safe Distance (Phase to Phase, kV) (m/ft) 0-50 3.05 (10) 50-200 4.60 (15) 200-350 6.10 (20) 350 -500 7.62 (25) 500 -750 10.67 (35) 750 -1000 13.725 (45) © Jan 2022 0407SE Operation Manual...
  • Page 21 • Do not replace key parts that affect machine stability with different weights or specifications. • Do not modify or change moving aerial platforms without the manufacturer’s prior written permission. 0407SE Operation Manual © Jan 2022...

  • Page 22: Work Environment Hazards

    • Running speed should not exceed Sinoboom, it must be approved or guided by the 0.8 km/h (0.5 mph) when the plat- manufacturer. form rises.

  • Page 23: Unsafe Operation Hazards

    Do not use the platform to push the machine or other objects. • Do not allow the platform to touch nearby objects. • Do not tie the platform onto nearby objects. • Do not put the load outside the platform. 0407SE Operation Manual © Jan 2022...

  • Page 24: Fall Hazards

    COLLISION HAZARDS At a minimum, operators must operate and maintain the machine as stated in the Operation Manual and in the Maintenance Manual in addition to following more strin- gent industry regulations and workplace rules. © Jan 2022 0407SE Operation Manual...

  • Page 25: Crush Hazards

    • Maintain good judgment and plan- ning when using the controller on the ground to operate the ma- chine. Maintain proper distance between operator, machine and fixed object. 0407SE Operation Manual © Jan 2022...

  • Page 26: Explosion And Fire Hazards

    During operation, keep the left and right doors of the chassis closed and locked. Only trained service personnel can open the left and right doors to repair the machine. © Jan 2022 0407SE Operation Manual...

  • Page 27: Battery Hazards

    • Never store the battery in water or humid atomosphere. • Daily check the battery cable for damage, and replace any damaged parts before operating the machine. 0407SE Operation Manual © Jan 2022...

  • Page 28: Welding And Polishing Requirements3-10

    5. Block the wheels with the wheel wedges. maintenance requirements in the Operation Manual 6. Charge the battery. and the Maintenance Manual. NOTICE After using the machine, the power off switch must be disconnected. © Jan 2022 3-10 0407SE Operation Manual...

  • Page 29: Jobsite Inspection

    Operators must identify and avoid workplace hazards when mov- ing, installing and operating the machine. Unless approved by Sinoboom, never operate the ma- chine in a hazardous site. The following items present danger on the jobsite: •...
  • Page 30 JOBSITE INSPECTION This Page Intentionally Left Blank © Jan 2022 0407SE Operation Manual...

  • Page 31: Pre-Operation Inspection

    4. The operator should go through a professional train- ing based on this operation manual, and should be certified as a qualified operator in operation of this machine. 0407SE Operation Manual © Jan 2022...

  • Page 32: Conducting A Pre-Operation

    • Tires and wheels Be sure to correct the problem before operating the • Safety arm machine. • Limit switches and horn © Jan 2022 0407SE Operation Manual...

  • Page 33: Inspect Battery Level

    POWER RATIO DESCRIPTION The battery has been fully charged. 90-100% The battery is at 70% of its capacity. The battery is at 50% of its capacity. The battery is at 30% of its capacity. 0407SE Operation Manual © Jan 2022...

  • Page 34: Indoor/Outdoor Mode Verification

    The indoor mode can never be used outdoors. For the setting method of indoor/outdoor mode, please refer to Setting method of indoor/outdoor mode, page 7-9。 © Jan 2022 0407SE Operation Manual...

  • Page 35: Pre-Operation Function Test

    Only qualified maintenance technicians can repair the machine according to the manufacturer’s regulations. After any maintenance, the operator must perform an- other pre-operation inspection before conducting a pre- operation function test. Figure 6-1 Ground controller 0407SE Operation Manual © Jan 2022...
  • Page 36 ON position. 2. Turn the key switch to the ground control position. 3. Ensure the relevant indicator light comes on and no error message appears. Emergency stop button © Jan 2022 0407SE Operation Manual...

  • Page 37: Testing The Platform Controller (Dtc)

    2. Pull out the emergency stop button on the platform and ground to the ON position. 12. Drive/steer 5. Platform down function enable Horn button switch 13. Drive high/low 6. Drive forward speed select switch 0407SE Operation Manual © Jan 2022...
  • Page 38 Drive and brake functions Note: The drive/steer speed vary with the joystick deflection, the less the joystick is deflected, the slower the speed. Drive high/low speed select button © Jan 2022 0407SE Operation Manual...

  • Page 39: Testing The Platform Controller

    2. Push the button again, the button indicator light should be off and the machine should drive at high speed. EMERGENCY Figure 6-3 Platform controller (SINOBOOM) 8. Emergency stop 1. Steer right button 9. Display screen (to display battery 2.
  • Page 40 Note: The lift/lower speed vary with the joystick 2. Pull out the emergency stop button on the deflection, the less the joystick is deflected, the slower platform and ground to the ON position. the speed. Drive and brake functions Horn button © Jan 2022 0407SE Operation Manual...

  • Page 41: Testing The Drive Speed

    Driving the machine at a reasonable speed is essential deflection, the less the joystick is deflected, the slower to safe machine operation. The drive function should the speed. respond quickly and smoothly under the control of the 0407SE Operation Manual © Jan 2022...

  • Page 42: Testing The Emergency Lowering

    Low speed test: DTC system:press the drive/steer function enable switch, and then press the drive high/ 3. —SINOBOOM system:move upwards the lift function enable switch on the platforn controller, the low speed select switch, the low speed indicator light of the switch should be on.

  • Page 43: Testing The Tilt Protection Function

    50mm × 58 mm (4 in. × 2 in. × 2.3 in.). 10. Change the machine’s walking function to a plat- form lifting function and then push the handle to raise the platform about 2 m (6.6 ft), the tilt alarm 0407SE Operation Manual © Jan 2022...

  • Page 44: Testing The Pothole Guard

    OL), please re-calibrate the weight sensor. NOTICE NOTICE Only qualified person trained by Sinoboom is allowed Only qualified person trained by Sinoboom is allowed to calibrate the weighing system. to calibrate the weighing system.
  • Page 45 For the description of the keys of the ground controller , please refer to the Ground Controller section of Opera- tion Manual or Functional Test section of Maintenance Manual. 0407SE Operation Manual 6-11 © Jan 2022...
  • Page 46 PRE-OPERATION FUNCTION TEST This Page Intentionally Left Blank © Jan 2022 6-12 0407SE Operation Manual...

  • Page 47: Operating The Machine

    If more than one operator uses the same ma- chine at different times of the same work shift, they must all be qualified operators and follow all the safety rules and instructions in this Operation Manual. 0407SE Operation Manual © Jan 2022...

  • Page 48: Using The Emergency Lowering

    ON position. 5. Pull out the emergency stop button on the ground controller to the ON position, and meanwhile hold the Enter key for 5s, the setting screen will be shown on the display. © Jan 2022 0407SE Operation Manual...

  • Page 49: Operation From Ground

    • Do not operate the machine if any control handle or switch is not returnted to off position after being released. 0407SE Operation Manual © Jan 2022...

  • Page 50: Sinoboom System

    1. With machine stowed, the machine can be driven in high/low speed mode. 2. Move the drive high/low speed select switch to select the desired drive speed. Move upwards the drive high/low speed switch, the low drive speed © Jan 2022 0407SE Operation Manual...

  • Page 51: Operating With The Platform Control

    The rail folding system consists of the fold-down rails of the extension platform and the fold- down rails of the fixed platform. To fold the rails： 1. Remove the platform control box and support. 0407SE Operation Manual © Jan 2022...

  • Page 52: Driving On A Slope

    As the weight of the machine’s platform increases, the machine’s climbing capacity reduces. To determine the slope: 1. Use a carpenter’s rule, a straight board (longer than 1 m [3.3 ft]), and a tape measure. © Jan 2022 0407SE Operation Manual...
  • Page 53 (lower than the water filler plug), wear gloves to add distilled water or 0407SE Operation Manual © Jan 2022...

  • Page 54: Charger Led And Digital Display

    20 30… Charger in-built curve codes and respective battery 100 (%). models • V charge voltage indicator light：show the current charge voltage, digitally show the specific voltage value, for example：24.0 (V). © Jan 2022 0407SE Operation Manual...

  • Page 55: Setting Method Of Indoor/Outdoor

    The outdoor mode is set successfully, 2. After the outdoor mode is chosen, the decimal point and the display shows "Od". on the right of the platform display will go off, the max platform height shall be 3.8m(12ft 5.6in), 0407SE Operation Manual © Jan 2022...
  • Page 56 In this case, return the control handle to neutral and release, then hold the enable switch on the control handle and push forward, the platform will go on raising to 4.5m(14ft 9.2in). © Jan 2022 7-10 0407SE Operation Manual...

  • Page 57: Transporting And Lifting The Machine

    • Lock the wheels of the machine after it has been installed to prevent the machine from rolling. Figure 8-1 0407SE Operation Manual © Jan 2022...

  • Page 58: Lifting The Machine With A Crane

    3. Remove all loose parts from the machine. 5. Lift the machine according to the following figure. 4. Determine the center of gravity of the machine,“X” in the figure represents 558mm(1ft 10in); “Y” in the figure represents 327mm(1ft 0.9in). © Jan 2022 0407SE Operation Manual...

  • Page 59: Transporting The Machine

    NOTICE To protect the platform guardrail, choose the appropriate length of spreader. TRANSPORTING THE MACHINE Obey the following requirements when transporting the machine using trucks or trailers: Figure 8-4 0407SE Operation Manual © Jan 2022...
  • Page 60 TRANSPORTING AND LIFTING THE MACHINE NOTICE During transportation, retract the extension platform so that the extension platform is secure at the slots. Ensure that the extension platform cannot extend or shake out of the main platform during transportation. © Jan 2022 0407SE Operation Manual...

  • Page 61: Maintenance

    • Conduct a quarterly inspection on machines that as stated in operation manual and maintenance have been out of service for a period lasting longer than three months. manual. 0407SE Operation Manual © Jan 2022...

  • Page 62: Following Amaintenance Schedule

    Every half a year or every 500 re-inspected after repair is completed and marked A+B+C hours in the box marked "inspection". Select the appropriate inspection procedure based on the Every year or every 1000 hours A+B+C+D inspection type. © Jan 2022 0407SE Operation Manual...
  • Page 63 B-4 Inspect Hydraulic Oil B-5 Inspect Hydraulic Tank Air Filter B-6 Inspect Manul Brake Release B-7 Inspect Emergency Lowering B-8 Inspect Braking Device B-9 Test Lift/Lower Speed B-10 Test Drive Speed B-11 Inspect Tilt Protection 0407SE Operation Manual © Jan 2022...
  • Page 64 Machine Has Items in Good Damage or Description Been Repaired Condition Malfunction D-1 Inspect Scissor Arm Installation Bearing D-2 Inspect Chassis Slider D-3 Replace Hydraulic Oil User Inspector Signature Inspector Date Inspector Title Inspector Company © Jan 2022 0407SE Operation Manual...

  • Page 65: Decals/Nameplates Inspection

    Do not operate the engine if there are missing or badly worn safety labels. 0407SE Operation Manual 10-1 © Jan 2022...

  • Page 66: Decals/Nameplates(Gb)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(GB) 11 12 12 11 12 11 21 33 © Jan 2022 10-2 0407SE Operation Manual...
  • Page 67 101040100010 Decal-Hydraulic oil filler port 101014100022 Decal-Emergency stop switch 101055103016 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 Nameplate-GB 101017100009 101014100032 Decal-Serial number Decal-Forklift pocket 101012100026 101054103001 Decal-Read manuals Decal-Tipping hazard 101049103022 Decal-Tipping hazard 101054103002 0407SE Operation Manual 10-3 © Jan 2022...
  • Page 68 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks Decal-0407SE operation requirements 101072103017 Decal-0407SE operation requirements 101072103003 101058103001 LOGO-IPAF 101040103008 Decal-Brake release Decal-Lanyard anchorage point 101048100014 Decal-Emergency lowering 101014100025 © Jan 2022 10-4 0407SE Operation Manual...

  • Page 69: Decals/Nameplates(Ce-Metric)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(CE-METRIC) 9 27 34 26 0407SE Operation Manual 10-5 © Jan 2022...
  • Page 70 Decal-Electrocution hazard Decal-Charge voltage 101014100024 Decal-Safety arm 101040100010 Decal-Hydraulic oil filler port 101014100022 Decal-Lanyard anchorage point 101016100030 Decal-Emergency lowering 101014100025 Decal-0407SE operation requirements 101072103003 Decal-0407SE operation requirements 101072103002 Decal-Tipping hazard 101054103002 101054103001 Decal-Read manuals 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 Nameplate-CE...
  • Page 71 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Tipping hazard 101040103018 Attention line, 50mm wide 216060000004 101062103022 Decal-Work environment verification 0407SE Operation Manual 10-7 © Jan 2022...

  • Page 72: Decals/Nameplates(Ce-Imperial)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(CE-IMPERIAL) 9 27 34 26 © Jan 2022 10-8 0407SE Operation Manual...
  • Page 73 Decal-Electrocution hazard Decal-Charge voltage 101014100024 Decal-Safety arm 101040100010 Decal-Hydraulic oil filler port 101014100022 Decal-Lanyard anchorage point 101016100030 Decal-Emergency lowering 101014100025 Decal-0407SE operation requirements 101072103003 Decal-0407SE operation requirements 101072103002 Decal-Tipping hazard 101054103002 101054103001 Decal-Read manuals 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 Nameplate-CE...
  • Page 74 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Tipping hazard 101040103018 Attention line, 50mm wide 216060000004 101062103022 Decal-Work environment verification © Jan 2022 10-10 0407SE Operation Manual...

  • Page 75: Decals/Nameplates(Ce-Jp)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(CE-JP) 16 9 29 30 0407SE Operation Manual 10-11 © Jan 2022...
  • Page 76 101014100022 Decal-Emergency stop switch 101055103016 101014100032 Decal-Serial number Decal-Forklift pocket 101012100026 101054103001 Decal-Read manuals Decal-Tipping hazard 101049103022 Decal-Tipping hazard 101054103002 Decal-0407SE operation requirements 101072103002 Decal-0407SE operation requirements 101072103003 101058103001 LOGO-IPAF 101040103008 Decal-Brake release © Jan 2022 10-12 0407SE Operation Manual...
  • Page 77 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks Decal-Lanyard anchorage point 101058103017 Decal-Lifting point 101014100020 Decal-Emergency lowering 101014100025 0407SE Operation Manual 10-13 © Jan 2022...

  • Page 78: Decals/Nameplates(Ce-Pl)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(CE-PL) 7 8 9 10 18 10 10 16 10 9 32 33 © Jan 2022 10-14 0407SE Operation Manual...
  • Page 79 Decal-Hydraulic oil filler port 101014100022 Decal-Emergency stop switch 101055103015 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 Nameplate-CE 101012100037 101014100032 Decal-Serial number Decal-Forklift pocket 101012100026 101054103001 Decal-Read manuals Decal-Tipping hazard 101049103022 Decal-Tipping hazard 101054103002 Decal-0407SE operation requirements 101072103002 0407SE Operation Manual 10-15 © Jan 2022...
  • Page 80 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks Decal-0407SE operation requirements 101072103003 101058103001 LOGO-IPAF 101040103008 Decal-Brake release Decal-Lifting operation point 101016100030 Decal-Emergency lowering 101014100025 © Jan 2022 10-16 0407SE Operation Manual...

  • Page 81: Decals/Nameplates(Ansi)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(ANSI) 27 34 26 0407SE Operation Manual 10-17 © Jan 2022...
  • Page 82 Decal-Electrocution hazard Decal-Charge voltage 101014100024 Decal-Safety arm 101040100010 Decal-Hydraulic oil filler port 101014100022 Decal-Lanyard anchorage point 101016100030 Decal-Emergency lowering 101014100025 Decal-0407SE operation requirements 101072103006 Decal-0407SE operation requirements 101072103005 Decal-Tipping hazard 101054103002 101054103001 Decal-Read manuals 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 Nameplate-ANSI...
  • Page 83 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Tipping hazard 101040103020 Attention line, 50mm wide 216060000004 101062103022 Decal-Work environment verification Decal-Annual inspection 101040103015 Decal-Detachable handle support 101040103014 0407SE Operation Manual 10-19 © Jan 2022...

  • Page 84: Decals/Nameplates(Kcs)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(KCS) 7 8 9 10 31 32 9 10 16 18 10 9 10 9 © Jan 2022 10-20 0407SE Operation Manual...
  • Page 85 Decal-Emergency stop switch 101055103015 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 Nameplate-KCS 101015100026 101014100032 Decal-Serial number Decal-Forklift pocket 101012100026 101054103001 Decal-Read manuals Decal-Tipping hazard 101049103022 Decal-Tipping hazard 101054103002 Decal-0407SE operation requirements 101072103002 Decal-0407SE operation requirements 101072103003 0407SE Operation Manual 10-21 © Jan 2022...
  • Page 86 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101058103001 LOGO-IPAF 101040103008 Decal-Brake release Decal-Lanyard anchorage point 101016100030 Decal-Emergency lowering 101014100025 © Jan 2022 10-22 0407SE Operation Manual...

  • Page 87: Decals/Nameplates(As)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(AS) 10 11 32 33 34 35 10 11 17 19 11 10 11 10 F向(两处) 0407SE Operation Manual 10-23 © Jan 2022...
  • Page 88 Decal-Detachable handle support 101040103014 Decal-Emergency stop switch 101055103015 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 Nameplate-AS 101012100038 101014100032 Decal-Serial number Decal-Forklift pocket 101012100026 101054103001 Decal-Read manuals Decal-Tipping hazard 101049103022 Decal-Tipping hazard 101054103002 Decal-0407SE operation requirements 101072103002 © Jan 2022 10-24 0407SE Operation Manual...
  • Page 89 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks Decal-0407SE operation requirements 101072103014 101058103001 LOGO-IPAF 101040103008 Decal-Brake release Decal-Lanyard anchorage point 101016100030 Decal-Emergency lowering 101014100025 0407SE Operation Manual 10-25 © Jan 2022...

  • Page 90: Decals/Nameplates(Csa)

    DECALS/NAMEPLATES INSPECTION DECALS/NAMEPLATES(CSA) 27 34 26 © Jan 2022 10-26 0407SE Operation Manual...
  • Page 91 Decal-Electrocution hazard Decal-Charge voltage 101014100024 Decal-Safety arm 101040100010 Decal-Hydraulic oil filler port 101014100022 Decal-Lanyard anchorage point 101016100030 Decal-Emergency lowering 101014100025 Decal-0407SE operation requirements 101072103006 Decal-0407SE operation requirements 101072103005 Decal-Tipping hazard 101054103002 101054103001 Decal-Read manuals 215050000012 Blind rivet 4×8-ZnD GB/T 12618.2 Nameplate-CSA...
  • Page 92 DECALS/NAMEPLATES INSPECTION Description Part NO. Remarks 101012100029 Decal-Crush hazard Decal-Tipping hazard 101040103020 Attention line, 50mm wide 216060000004 101062103022 Decal-Work environment verification Decal-Annual inspection 101040103015 Decal-Detachable handle support 101040103014 Decal-Operating instructions 101048103023 104011100021 Decal-Crush hazard © Jan 2022 10-28 0407SE Operation Manual...

  • Page 93: Appendix 1: Symbols And Description

    Collision hazards-Re- Electrocution hazards Electrocution hazards Keep a safe distance Tip-over hazards-Avoid lease brake on ramp on platform on the ground and from power lines uneven ground platform 0407SE Operation Manual © Jan 2022...
  • Page 94 Indoor use handle position and down platform Outdoor use The side force Electrocution hazards Wear protective cloth- Battery explosion ing and glasses hazard No smoking No smoking Only professional Improve point Lashing points maintenance © Jan 2022 0407SE Operation Manual...
  • Page 95 DECALS/NAMEPLATES INSPECTION personnel can start the maintenance Tire to ground load Forklift fork position Platform carrying Carrying capacity of Hydraulic oil filler capacity fixed and extended platform Horn Tool or weight Fast/high speed Slow/low speed 0407SE Operation Manual © Jan 2022...
  • Page 96 DECALS/NAMEPLATES INSPECTION This Page Intentionally Left Blank © Jan 2022 0407SE Operation Manual...

  • Page 97: Appendix 2: Prepare The Work Record Before Delivery

    2. Use the table to record the results. After each section is complete, mark the appropriate box. 3. Record the inspection results. If any inspection results are "NO", the machine must be stopped and re-in- spected after repair is completed and marked in the box marked "inspection". 0407SE Operation Manual © Jan 2022...
  • Page 98 DECALS/NAMEPLATES INSPECTION This Page Intentionally Left Blank © Jan 2022 0407SE Operation Manual...

  • Page 99: Appendix 3: Repair & Inspection Report

    B-1 Inspect Electric Wires B-2 Inspect Rim ,Tire and Fasteners B-3 Inspect Battery B-4 Inspect Hydraulic Oil B-5 Inspect Hydraulic Tank Air Filter B-6 Inspect Manul Brake Release B-7 Inspect Emergency Lowering B-8 Inspect Braking Device 0407SE Operation Manual © Jan 2022...
  • Page 100 4. Record the inspection results. If any inspection results are "NO", the machine must be stopped and re- inspected after repair is completed and marked in the box marked "inspection". Select the appropriate inspection procedure based on the inspection type. © Jan 2022 0407SE Operation Manual...
  • Page 102 Solution s Alw ays For B et t er A ccess Solution s Always for Better Access Solutions AS/N ZS Hunan Sinoboom Intelligent Equipment Co., Ltd. 长沙市宁乡高新技术产业园区金洲大道东 128 号 No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China 市宁乡高新技术产业园区金洲大道东...

This manual is also suitable for:

1530se

Table of Contents