Advertisement
SSA Sub saturation
SHU Sub hue
SSH Sub sharpness
G2 adj G2 adjustment
32K adj
----------------------------------------------------------------------
----------
Models KV-16WS1U KV-21X1U KV-21X4U KV-20WS1U BE-5 chassis
To access the service mode:
Turn the set on and then put into standby
Press the On Screen Display button
Press the "5" button
Press the "VOLUME +" button
Press the "TV" button
Press the "MENU" button on the remote control to see the service menu
on screen
Use the "blue" button and the "green" button on the remote control to
navigate the service menu
Use the "Yellow" button and the "red" button to adjust the selected
data
Turn the set off to exit and store
Test mode 2 allows entry of TT numbers to perform some functions. The
important numbers for this chassis are given below
TT00 switch the TT mode off
TT08 set the set to shipping condition
TT26 Set CTV to UK model (PAL I)
TT41 Re-initialise NVM
TT43 Re-initialise geometry settings
Note: For TT numbers above 41, the channel number needs to be 59
----------------------------------------------------------------------
----------
Models. KV-32WS4U KV32WX4U KV32WX2U AE-4 chassis
To enter the service mode:
Turn the mains power on while holding the "PROG +" and the "PROG -"
Advertisement
