Advertisement
Use buttons "1" and "4" on the remote control to navigate the service
menu
Use buttons "3" and "6" to adjust the selected data
Press the "MUTE" button and then the "0" button to store the data
Press the "5" button and then the "0" button to initialise the set.
(Note, this is an extreme measure and should be used with caution!)
Turn the set off to exit
----------------------------------------------------------------------
----------
Models KP-41S3U RE-1 chassis
To access the service mode:
Turn the set on and then put into standby
Press the On Screen Display button
Press the "5" button
Press the "VOLUME +" button
Press the "TV" button
Use buttons "1" and "4" on the remote control to navigate the service
menu
Use buttons "3" and "6" to adjust the selected data
Press the "MUTE" button and then the "0" button to store the data
Press the "5" button and then the "0" button to initialise the set.
(Note, this is an extreme measure and should be used with caution!)
Turn the set off to exit
----------------------------------------------------------------------
----------
Models KP-41DS1U RE-2D chassis
To access the service mode:
Turn the set on and then put into standby
Press the On Screen Display button
Press the "5" button
Press the "VOLUME +" button
Press the "TV" button
Use the JOYSTICK Up / Down on the remote control to navigate the
service menu
Move the JOYSTICK to the right > to enter the selected adjustment
Advertisement
