Advertisement
Press the On Screen Display button
Press the "5" button
Press the "VOLUME +" button
Press the "TV" button
Press the "MENU" button on the remote control to bring up the test
screen
Use the joystick on the remote control to navigate the service menu
(< > ^ v keys BE-3E)
Press the right joystick to enter the selected adjustment
Turn off the power to store and exit the service mode
Test mode 2 allows entry of TT numbers to perform some functions. The
important numbers for this chassis are given below
TT00 switch the TT mode off
TT08 set the set to shipping condition
TT24 Set CTV to UK model (PAL I)
TT44 Set all favourite pages to 100
To re-initialise the NV Ram follow the procedure below:
Set the TV to channel 59
Select TT49
Switch off at the mains supply, wait for one minute and switch the
set back on
Select channel 59, and enter the service mode
Select TT24, (UK destination)
Select TT42, (general reset)
Switch off at the mains, wait for one minute and switch on again
Auto tune the channels and carry out a complete adjustment on the set
----------------------------------------------------------------------
----------
Models KP-41S3U RE-1 chassis
To access the service mode:
Turn the set on and then put into standby
Press the On Screen Display button
Press the "5" button
Press the "VOLUME +" button
Press the "TV" button
Advertisement
