Advertisement
Press OK on the JOYSTICK to EXIT
Press the "MUTE" button and then the "0" button to write data
Press the "On Screen Display" button to copy data
Turn the set off to quit the service mode when adjustments are
complete
----------------------------------------------------------------------
----------
Models KV-14V4U TE-1 chassis
To access the service mode:
Turn the set on and then put into standby
Press the On Screen Display button
Press the "5" button
Press the "VOLUME +" button
Press the "TV" button
Use buttons "1" and "4" on the remote control to navigate the service
menu
Use buttons "3" and "6" to adjust the selected data
Turn off the power to store and exit the service mode
The codes on screen are as follows:
ODL Power On Delay
OSH On screen H-position
MUT FTZ muting on *Do not adjust
VAM V. size
VBC V breath correct *Do not adjust
PAM Parabola amp. *Do not adjust
PTI Parabola tilt *Do not adjust
VLI V-linearity
CCR Corner correction *Do not adjust
HAM V. cent *Do not adjust
BIN Blue intensity
GIN Green intensity
RIN Red intensity
CLS Colour system
SCO Sub contrast
SBR Sub brightness
Advertisement
