Hitachi PSC-A32MN Installation And Operation Manual page 87

Central station
Hide thumbs Also See for PSC-A32MN:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
Operation
5.4.8 Restore Settings
1 Select "Restore Settings" on the "Service Menu" screen.
?
N O T E
This function cannot be selected when remote control switch operation is prohibited, an external input contact is ON, or outdoor unit capacity control is
not cancelled. Cancel these parameters before performing "Restore settings".
2 Tap "Yes" at the confirmation screen.
?
N O T E
If "No" is tapped, the screen returns to "Service Menu".
3 A second confirmation screen is displayed. Tap "Yes" here to restore the settings. The screen changes after several seconds,
and a check of the connections of the system starts.
?
N O T E
If "No" is tapped, the screen returns to "Service Menu".
(2)
Information
It is also possible to restore the settings when the "Start-up" screen is being displayed.
1 Tap the "Restore" at the lower right corner of the "Start-up"
screen for more than 5 seconds.
Restore settings is not displayed when remote control switch
operation is prohibited, an external input contact is ON, or
outdoor unit capacity control is not cancelled.
2 Connection check process starts after a few seconds.
3 When the process for connection check is finished, the
"Date and Time Settings" screen is displayed. (Refer to
"5.3.5 Date and time settings").
79
PMML0332A rev.0 - 05/2015
(1)
(3)
Restore Settings

Advertisement

Table of Contents
loading

Table of Contents