Hitachi PSC-A32MN Installation And Operation Manual page 82

Operation
Other settings
10 Select the target of External Input Control. (All Groups/Block/Group).
• Tap the button of a Group to switch its selection state.
• Tap the button of a Block to switch the selection state of all the Groups in the Block.
• Tap the "All Groups selection" button to switch the selection state of all the Groups.
• The selected groups are indicated with a check mark.
11 Tap "Setting completed" to confirm the set contents and return to the External Input/Output Setting screen .
5.4.4.5 External Output Setting
1 Select "External Input/Output Setting" on the Service Menu screen.
Selection is not possible when air conditioners are in operation, or when the contact for external input signal is ON.
2 Select the Output target of the External Output (Output 1, Output 2).
3 Select the function to be used with the external output.
The button for the selected function is highlighted in yellow.
4 Tap "Service Menu" to complete the external Input/Output Setting and return to Service Menu screen.
(3)
74 PMML0332A rev.0 - 05/2015
(10)
(1)
(4)
(11)
(2)