For Your Safety; Signal Words; Intended Use - Beckhoff CU8803-000 Series Manual

For your safety

2 For your safety
The Safety chapter first explains the safety symbols used in the documentation and their meanings. They
contain fundamental safety instructions that are essential for the avoidance of personal injuries and damage
to property.
Exclusion of liability
Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the
devices outside the documented operating conditions.
2.1

Signal words

The signal words used in the documentation are classified below.
Warning of personal injuries
Hazard with high risk of death or serious injury.
Hazard with medium risk of death or serious injury.
There is a low-risk hazard that can result in minor injury.
Warning of property and environmental damage
There is a possibility of damage to the environment, equipment or data.
2.2

Intended use

The CP-Link 4 transmitter box CU8803-000x is designed for DIN rail mounting in control cabinets of machine
and system engineering. It is used to operate a Control Panel CP29xx-0010, CP39xx-0010 or
CPX39xx-0010 at a distance of up to 100 m from the industrial PC. The transmitter box can be used in
hazardous areas and is ATEX and IECEx certified.
The transmitter box is designed for a working environment that meets the IP20 protection rating. This
involves finger protection and protection against solid foreign objects up to 12.5 mm. There is no protection
against water. Operation of the devices in wet and dusty environments is not permitted.
The specified limits for technical data must be adhered to.
The transmitter box can be used within the documented operating conditions.
Improper use
Do not use the transmitter box outside the documented operating conditions.
6
DANGER
WARNING
CAUTION
NOTICE
Version: 2.0 CU8803-000x