Advertisement
Indicators and Controls
Fig. 2: 7 LED display
Select Button
The Select Button is for selection of battery, deactivate Ignition Control Mode, turn ON/ OFF the reverse
charging feature and Manual Override feature.
● Long press the Select Button for 5 seconds for battery selection.
● Long press the Select Button for 15 seconds to deactivate Ignition Control Mode.
● Long press the Select Button for 20 seconds to turn ON/ OFF the reverse charging feature.
● Press the Select Button 4 times to activate the Manual Override feature which can force the reverse
charging.
Charging Status LED for LEAD ACID Battery – 3 Stages
Charging status LED
Fast flashes
Slow flashes
Solid
Charging Status LED for Lithium (LiFePO4) Battery – 2 Stages
Charging status LED
Fast flashes
Slow flashes
Reverse Charging LED: This LED ON when Reverse Charging.
The reverse charging feature is defaulted as ON. It can be changed by the following procedures.
1. Press and hold the Select Button for about 20 seconds until the 3 LED battery types all become solid
from flashing and then release the Select Button.
2. Press the Select Button to toggle reverse charging feature to be ON (Reverse Charging LED ON) or
OFF (Reverse Charging LED OFF).
3. The selection will be confirmed automatically after 5 seconds.
Charging stage
Bulk charge
Absorption
Float
Charging stage
Bulk charge
Absorption
Fig. 1: correct installation direction
Advertisement
