Troubleshooting - VTech KidiZoom Smart Watch MAX Instruction Manual

TROUBLESHOOTING

Check this section if you experience difficulty operating the KidiZoom
Smart Watch MAX.
Problem Correction
1. Slide the Master Power Switch Off for 30 seconds.
2. Slide the Master Power Switch On again and then
The watch
has stopped
working
3. If the watch doesn't work, recharge the battery and
1. Slide the Master Power Switch Off for 30 seconds.
Screen is
2. Slide the Master Power Switch On again and then
not working
correctly
1. Make sure the lighting conditions of the shooting
Image
2. Hold the watch still for taking photos.
taken is not
3. Check to see if the camera lens is clean. If you find
clear
1. Check the connections on the cable between the
Cannot
connect the
watch to a
2. Slide the Master Power Switch Off for 30 seconds.
computer
32
press the Home Button to turn the watch on. It should
now work properly.
repeat steps 1 and 2.
(Refer to the battery recharging section for details)
press the Home Button to turn the watch on. The
screen should now function normally.
environment are good.
some dust or dirt on it, please see the steps to clean
the lens in the Care & Maintenance section.
watch and the computer and review the Connecting to
a Computer section of this guide.
Slide the Master Power Switch On and reconnect the
watch and computer.
®