Connecting To A Computer - VTech KidiZoom Smart Watch MAX Instruction Manual

CONNECTING TO A COMPUTER

You can connect the KidiZoom
using the included Micro-USB Cable. To transfer files between your
watch and computer, follow these steps:
Pull up the rubber cover of the Micro-USB Port on the side of your
•
watch.
Insert the Micro-USB Cable (small end) into the Micro-USB Port on
•
the watch.
• Insert the larger end of the cable into a USB port on your computer.
You will see a removable drive called VTech 5316. Please use this to
•
transfer files to and from the watch. There is another removable drive
called VT SYSTEM, which is for storage of system data and should
not be accessed by users.
Note: Once the watch is connected to your computer, do not disconnect
the watch while files are transferring. Only eject the watch from your
computer once it completes transferring files. Once ejected, you can then
physically disconnect the watch from your computer. Ensure the rubber
cover over the micro-USB port is closed tightly.
To Back Up Photos or Videos:
From your computer, open the DCIM folder on the removable drive
•
VTech 5316.
• Copy and paste the photo and/or video files to a location on your
computer.
To Back Up Recorded Sounds:
From your computer, open the VOICE folder on the removable drive
•
VTech 5316.
• Drag and drop the files to a location on your computer.
To Transfer Photos or Videos to the KidiZoom
• First, select the photo or video files you would like to download from
your computer.
Locate and open the DOWNLOAD folder on the removable drive
•
VTech 5316 and drag and drop the photo or video files into the
PHOTO or VIDEO subfolders.
Note: Do not transfer photo or video files created by other cameras
(except for KidiZoom
Watch MAX, as these files may not be compatible.
11
® Smart Watch MAX to a PC or Mac
camera photo or video files) to KidiZoom
®
Smart Watch MAX
®
®
Smart